Author Topic: Slot Machine Repair  (Read 70 times)

Offline rwrimmer3

  • Level 0: Inanimate Carbon Rod
  • *
  • Join Date: Aug 2018
  • Location: Tampa Fl USA
  • Posts: 1
Slot Machine Repair
« on: August 08, 2018, 09:56:21 AM »
Thanks Pinball Pimp for suggestion. Father left me this slot machine it works just looking for someone to give it the once over to make sure it stays this way.

Offline number six

  • SysOp
  • Administrator
  • Level 10: Timelord
  • *****
  • Join Date: Sep 1992
  • Location: Valrico, FL
  • Posts: 12669
Re: Slot Machine Repair
« Reply #1 on: August 08, 2018, 10:15:54 AM »
Despite the Las Vegas badging, that looks like a Pachislo (Japanese Slot Machine). Are there 3 buttons on the front to stop each wheel? Does it have a little knob in the front instead of a big arm on the side? If so, yeah definitely Pachislo.

If the board has gone bad or something, not sure who would fix that. If it's working now you are fine.. those things run forever.

On the upside you could replace the machine for about $100.

Offline Hamster

  • Mad Sciencetist
  • Administrator
  • Level 10: Timelord
  • *****
  • Join Date: Nov 2008
  • Location: Hamster Land, Brandon, FL
  • Posts: 10512
    • Coin Op Florida
Re: Slot Machine Repair
« Reply #2 on: August 08, 2018, 12:55:38 PM »
if it works, then nothing to look over on it, if it gives an F1 error something, then you just need to reset it using the key on the inside.

generally the electronics do a very good job of "making sure everything" is working correctly. //

"Good engineers keep thick authoritative books on their shelf. Not for their own reference, but to throw at people who ask stupid questions. Hoping a small fragment of knowledge will osmotically transfer with each cranial impact." - eeguru

current: pins: TSPP, AMH, T3, ST:TNG, ST:LE, RG, RCT, DW. DE:ST, WW
vids: Q*bert, Mad Planets, (2) Sega Uni, Dual Outrun 2 Driver, OmegaRace, Ataxx, Reactor, Crystal Castle, MultiVector, Cloak and Dagger